Description
1. Description
The Pixi Pediatric CPAP Mask is specifically designed to provide noninvasive airflow therapy, the Pixi Pediatric CPAP Mask is for use on children aged 2 through 7 years who need to receive continuous positive airway pressure (CPAP) or bilevel therapy.
Intended Use: The Pixi Pediatric Description CPAP Mask Routes flow from a CPAP or bilevel device to support effective breathing therapy for pediatric patients.
Age-Specific Design: The design should be age-specific to cater to the needs of children in the selected age group, thus being comfortable and secure. This appliance is suitable for single-patient re-use in a home or institutional environment under conditions of hygiene and safety.
This mask prioritizes comfort and compliance, making therapy easier for children and caregivers alike.
2. Core Features: Its Benefits for the Patient
- Short Tube Assembly: Connects the mask to CPAP or bilevel device via a guaranteed flexible and leak-free hose to provide non-interruptible airflow.
- Elbow: Swiveling hub, allows easy rotation and flexing for the short tube, allowing it not to tangle
- Plug Tether: This would ensure an uninterrupted flow through the nose mask as it would be held against the hose.
- Mask Frame: Will give the mask some structural body as all these parts sit upon it. Should be stiff to allow full durability on all components.
- Frame Nodes: Strengthens the structure of the mask frame, enhancing stability and comfort when used.
- Mask Socket: Holds the mask cushion in place. This ensures a secure, comfortable fit around the nose of the child.
- Plug: Seals the mask when not attached to the device. This maintains hygiene and readiness for use.
- Cushion: This is a soft, contoured component that fits gently against the nose. The cushion creates a comfortable seal that is leak resistant.
- Vent: Permits exhaled air to quietly, efficiently disperse, Ventilation ensures proper ventilation and reduces noise.
- Cushion shoulder: Attaches closely to the head, no leaks occur with this addition, and better therapy ensues.
- Pressure Port: Allows the physician to control the amount of pressure being brought to the pressure point.
- Headgear: Soft with adjustable strap components that work to secure the mask to the skin of the individual’s head. Allows patients to make proper adjustments not to cause tension on their muscles.
- Top Headgear: Spread pressure directly on the forehead. This promotes stability with reduced discomfort
- Middle Headgear strap and buckle: adjusted to fit the mask in order to be snugly held for the child.
- Lower Headgear strap: Wrapped at the lower part of the head to provide additional support to avoid shifting during movements.
- Quick Release Clip: Facilitates the removal of the mask without having to struggle and provides convenience to caregivers to reduce the level of stress during emergencies or adjustment time.
- Lower Headgear Arms: Give additional support to ensure the mask is in place comfortably, hence reducing movement.
- 22mm Swivel: Connects the short tube to the device tubing, allowing flexible movement and compatibility with standard CPAP or bilevel devices.
- Tube Retainer: Holds the tubing firmly in place, avoiding any accidental disconnections and minimal tangling during therapy.
- Complete System: Refers to the fully assembled mask, including all its component parts, ready for use
- Frame System: It involves the mask frame and all associated elements that collaborate to provide a stable, effective therapy solution.
3. Specifications
Physical Dead Space
- Volume: 101.7 mL
Therapy Pressure
- Range: 3 to 20 cm H₂O
Compliance
- Mask Compliance: Less than 1.57 mL/cm H₂O between 5 cm H₂O and 15 cm H₂O
Resistance
- Drop in Pressure (Nominal):
- At 50 L/min: 0.8 cm H₂O
- At 100 L/min: 3.1 cm H₂O
Environmental Conditions
- Operating Temperature: +41°F to +104°F (+5°C to +40°C)
- Operating Humidity: 15% to 95% RH non-condensing
- Storage and Transport Temperature: -4°F to +140°F (-20°C to +60°C)
- Storage and Transport Humidity: Up to 95% RH non-condensing
Gross Dimensions
- Mask Fully Assembled (Without Headgear):
- Height: 1.38″ (35 mm)
- Width: 16.93″ (430 mm)
- Depth: 1.57″ (40 mm)
Mask Setting Options
- Configuration: Fully assembled with elbow assembly, no headgear
4. FAQs
How should I clean the Pixi Mask?
Thoroughly clean the separated mask components (excluding headgear), by gently rubbing in warm (approximately 86°F/30°C) water using mild soap. To optimize the mask seal, facial oils should be removed from the cushion after use. Use a soft bristle brush to clean the vent.
What should I do if my child experiences discomfort or mask leakage?
Ensure the mask is adjusted properly by repositioning the cushion, tightening, or loosening the headgear. If issues persist consult through the contact information listed below.
How often should the mask components be replaced?
It is recommended to replace the mask components, such as the cushion and frame, every 3 to 6 months, depending on their condition and usage.
5. What’s Included
- Short Tube Assembly
- Cushion
- Headgear with straps and quick-release clip
- Frame System with vent and pressure port
- User Guide
6. Return and Exchange Policy
Returns will not be processed under the following conditions:
- The item has been opened or used.
- The product is a hygienic item.
- The serial number is missing or removed.
- The item is a special order (subject to review).
- The return is made without prior communication.
- The return is initiated more than 7 days after delivery.
All items must be returned in their original packaging, complete with their serial numbers.
Special orders will be reviewed on a case-by-case basis to determine if a return is possible.
If you wish to return or exchange a product, please get in touch with us before sending it back to ensure a smooth process.
7. Get in Touch:
“At Global Care Sleep Centre, we strive to provide our patients access to the best CPAP supplies for their therapy at a price they can afford.”
Address:
2521, Centuria Medical Makati Kalayaan Ave. Cor. Salamanca St. Makati City
Contact Numbers:
Globe: 0956 760 6016
Smart: 0939 919 2723
Landline : +632 8571 3072
Mail: info@globalsleepcarecentre.com
